Sugarloaf Community

this is to the park managers/builders/park doods.

what can we expect for this years park? like how many features set up, will you set all the rails and jibs you have up and ready to shred?

how many jumps?
how many rails and jibs?
what kind of features and jumps?

-Please get back to us-

Tags: -, 2009, 2010, features, grounds, haywire, jibs, parks, rails, skybound

Reply to This

Replies to This Discussion

sickkkkkk!

Reply to This

i have no idea how thats what norton said in an earlier post but since the plan includes a jump line who cares im happy

Will Bartlett said:
ah. thats sick too. how do they plan on disconnecting them?

Reply to This

i dont think they can really disconnect them. they just need to make it so the traffic is directed AWAY from landings and knolls. and a hip transfer or C box could do that nicely.. then it could all be jumps on one side, rails on the other, with a height difference in the middle. to keep from having the people on the rail side. go onto the jump landings. (and the height difference could make for some wicked fun ideas).


the REALLY long flat bar rail should also be set up with a jump about 8 feet from it to get on, so it has to be hit with speed, and like an 8 foot gap off onto a nice down slope for a landing. you could get some steezy spins off that bad boy.

we should get some nice street entry down rails too. and set the flat down up like it was in haywire last year, with the regular jump straight onto it. and with the street style ramps on from either side for just the down section of it.

- Tree stalls, plastic culverts, oil tanks, a little old boat, tires, small quarter pipe with jibs and stalls on the lip, mounds of snow that aren't even official jumps, and a tap, like a jump with a tap in the middle of the table would be sick

also- the wavy piano rail?... YES PLEASE!!

Reply to This

im assuming where the first jump was in stomping grounds it would end there since there is a trail connecting to candyside.

nathan d. said:
i have no idea how thats what norton said in an earlier post but since the plan includes a jump line who cares im happy

Will Bartlett said:
ah. thats sick too. how do they plan on disconnecting them?

Reply to This

haha that ould make stonping grounds two rails without even a jump there because you would have to hike up to take the inrun out. idts

Parker said:
im assuming where the first jump was in stomping grounds it would end there since there is a trail connecting to candyside.

nathan d. said:
i have no idea how thats what norton said in an earlier post but since the plan includes a jump line who cares im happy

Will Bartlett said:
ah. thats sick too. how do they plan on disconnecting them?

Reply to This

do you have another idea?

nathan d. said:
haha that ould make stonping grounds two rails without even a jump there because you would have to hike up to take the inrun out. idts

Parker said:
im assuming where the first jump was in stomping grounds it would end there since there is a trail connecting to candyside.

nathan d. said:
i have no idea how thats what norton said in an earlier post but since the plan includes a jump line who cares im happy

Will Bartlett said:
ah. thats sick too. how do they plan on disconnecting them?

Reply to This

what he said. Norton??

Will Bartlett said:
ah. thats sick too. how do they plan on disconnecting them?

Reply to This

well this is all snow and weather dependant of course, but our plan is to have the stopming grounds start at the top of the mini pipe and end on the first cut to candyside. its also known as the black fork. haywire will go from tote like last year but it will end at candyside. i am thinking the mini pipe will have a sick snake run with jibs on it and were hoping to have jibs on both sides of the mini as well. im hoping for a small to medium sized jump line or 2 jumps in a row for the stomping grounds and maybe a hip twards the end. remember this is all weather dependant and right now i just want some cold weather so we can open. i just wanna make some turns.........oh and early season jib park somewhere

Reply to This

Whats gonna be in the haywire portion? and will you still be allowed to cut across from stomping to haywire?

norton said:
well this is all snow and weather dependant of course, but our plan is to have the stopming grounds start at the top of the mini pipe and end on the first cut to candyside. its also known as the black fork. haywire will go from tote like last year but it will end at candyside. i am thinking the mini pipe will have a sick snake run with jibs on it and were hoping to have jibs on both sides of the mini as well. im hoping for a small to medium sized jump line or 2 jumps in a row for the stomping grounds and maybe a hip twards the end. remember this is all weather dependant and right now i just want some cold weather so we can open. i just wanna make some turns.........oh and early season jib park somewhere

Reply to This

are ALL the rails gonna go up this year?.. cause we all know sugarloaf has tons of sick rails that lie untouched all season.

Reply to This

if we have rails that are not in its usually cause the need something done like plywood or welding or plastic.........usually

Reply to This

a few more rail pads leading to a start area for the jump line on haywire and we are gonna close the narrow section between stomping grounds and haywire. we talked and talked about it and it the only way we can get a true jump line and keep traffic from getting in the way. i think im cool with it cause it will give us two truly different parks. a real intermediate and real advanced park.

Jamie Walter said:
Whats gonna be in the haywire portion? and will you still be allowed to cut across from stomping to haywire?

norton said:
well this is all snow and weather dependant of course, but our plan is to have the stopming grounds start at the top of the mini pipe and end on the first cut to candyside. its also known as the black fork. haywire will go from tote like last year but it will end at candyside. i am thinking the mini pipe will have a sick snake run with jibs on it and were hoping to have jibs on both sides of the mini as well. im hoping for a small to medium sized jump line or 2 jumps in a row for the stomping grounds and maybe a hip twards the end. remember this is all weather dependant and right now i just want some cold weather so we can open. i just wanna make some turns.........oh and early season jib park somewhere

Reply to This

Reply to This

RSS

Latest Activity

PaulC added 2 blog posts
10 hours ago
dude i have no idea what you are talking.
14 hours ago
skiinthetrees and Dylan Price are now friends
14 hours ago
15 hours ago
Jamie didn't you ask for a up butter box? and it looks fine for skiers and i think that looks pretty cool
16 hours ago
Cutler and Sugarloaf Real Estate are now friends
17 hours ago
A blog post by Sugarloaf Snow Reporter was featured
You may not have heard but there's some awesomeness starting tonight 3/19: Sugarloaf's VERY VINTAGE WEEKEND!! Started last year by Snow Reporter Lizzy in honor of her beloved old-school Ebay finds, the event starts tonight with 70s Disco band Motor…
17 hours ago
Sugarloaf Snow Reporter added a blog post
You may not have heard but there's some awesomeness starting tonight 3/19: Sugarloaf's VERY VINTAGE WEEKEND!! Started last year by Snow Reporter Lizzy in honor of her beloved old-school Ebay finds, the event starts tonight with 70s Disco band Motor…
17 hours ago
hahahah
yesterday
I know you guys arent condoning it by any means, im sure if i was canadian and the Rome factory laid off a bunch of guys and sent the jobs somewhere id be mad. I was just venting my frustrations....I know what it is to be laid off. It is just a surp…
yesterday
PaulC added a blog post
Ok, let's take a vote. Who thinks this is the greatest March ever at Sugarloaf? I have to believe this one ranks among the best!
yesterday
I am not condoning these types of business practices. I am simply providing some insight and industry knowledge on the subject. There are certainly some companies out there like Mervin Manufacturing (Lib Tech, GNU, Roxy) that are still hand made in…
yesterday

© 2010   Created by Sugarloaf

Badges  |  Report an Issue  |  Privacy  |  Terms of Service